歡迎光臨濰坊市正邦重工機械有限公司!Welcome to Weifang Zhengbang Heavy Industry Machinery Co., Ltd!
熱門關鍵詞Hot Keywords:洗沙機/sand washing machine,洗沙設備/sand washing equipment,廣東洗砂機/Guangdong sand washing machine,洗砂機/sand washing machine
高級搜索:
顎式破碎機/Jaw crusher

名稱:顎式破碎機/Jaw crusher

詳細信息

顎式破碎機介紹

顎式破碎機規格參數符合標準,其性能和結構采用了系統的、的優化設計,具有強度高、可靠耐用、破碎力大、產量高等特點,廣泛適用于破碎抗壓強度不超過320MPa的各種物料的破碎,尤其適用于大塊堅硬物料的粗碎。機體采用整體鑄鋼結構, 性能穩定、可靠。顎式破碎機是專門針對礦山生產線而開發設計的一系列節能型產品。

顎式破碎機性能特點

1、機體采用整體鑄鋼結構,強度高,穩定性好;

2、偏心軸轉速高,破碎能力大,產量高;

3、其破碎比大,產品粒度均勻;

4、液壓式排料口調整裝置和絲桿式排料口調整裝置任由客戶選擇,靈活性好,省時省力;

5、結構簡單,工作可靠,運營費用低。

6、設備節能,直接降低生產成本;

7、排料口調整范圍大,可滿足不同用戶的要求;

8、噪音低,運轉平穩,粉塵少。

顎式破碎機工作原理

Introduction of jaw crusher
The specification and parameters of jaw crusher meet the national standards. Its performance and structure adopt systematic and comprehensive optimization design. It has the characteristics of high strength, reliability and durability, large crushing force and high output. It is widely used for crushing all kinds of materials with compressive strength not more than 320MPa, especially for coarse crushing of large hard materials. The body is made of integral cast steel structure, with stable and reliable performance. Jaw crusher is a series of high-efficiency and energy-saving products specially developed and designed for mine production line.
Performance characteristics of jaw crusher
1. The machine body adopts the integral cast steel structure, with high strength and good stability;
2. High speed of eccentric shaft, large crushing capacity and high output;
3. Its crushing ratio is large and the particle size of the product is even;
4. The hydraulic type discharge port adjusting device and screw type discharge port adjusting device can be selected by customers, which is flexible, time-saving and labor-saving;
5. Simple structure, reliable work and low operation cost.
6. Energy saving of equipment and direct reduction of production cost;
7. The adjustment range of discharge port is large, which can meet the requirements of different users;
8. Low noise, stable operation and less dust.
Working principle of jaw crusher


如上圖所示,顎式破碎機工作原理是:電動機1驅動皮帶2和皮帶輪5,通過偏心軸4使動顎3做平面運動,當動顎3上升時,肘板8之間的夾角變大,從而推動顎板6向固定顎板7接近,與此同時物料被擠壓;當動顎3下行時,肘板8之間夾角變小,動顎板6在拉桿彈簧的作用下離開固定顎板7,此時被壓碎的物料從破碎腔排出。隨著電動 機連續轉動而顎破動顎做周期性地壓碎物料,實現連續生產。

顎式破碎機優勢

鄂式破碎機作為頭破設備,產品型號全,適用于不同硬度與不同質地的石料。且設備使用壽命長,目前為止,鄂式破碎機已運用在了上千條生產線當中,且故障率低,平時只要按時更換易損件即可,操作簡單、安全。

顎式破碎機技術參數

As shown in the figure above, the working principle of jaw crusher is: motor 1 drives belt 2 and pulley 5 to make moving jaw 3 move in plane through eccentric shaft 4. When moving jaw 3 rises, the included angle between elbow plate 8 increases, so as to push jaw plate 6 to approach fixed jaw plate 7, and at the same time, materials are squeezed; when moving jaw 3 descends, the included angle between elbow plate 8 decreases, and moving jaw plate 6 is under the action of pull rod spring Leaving fixed jaw 7, the crushed material is discharged from the crushing chamber. With the continuous rotation of the motor, the jaw is broken and the jaw is used to crush materials periodically to realize continuous production.
Advantages of jaw crusher
As the head breaking equipment, the jaw crusher has a complete product model, which is suitable for stones of different hardness and different quality. And the service life of the equipment is long, so far, the jaw crusher has been used in thousands of production lines, and the failure rate is low. Usually, as long as the vulnerable parts are replaced on time, the operation is simple and safe.
Technical parameters of jaw crusher



不卡一卡二卡三网站