歡迎光臨濰坊市正邦重工機械有限公司!Welcome to Weifang Zhengbang Heavy Industry Machinery Co., Ltd!
熱門關鍵詞Hot Keywords:洗沙機/sand washing machine,洗沙設備/sand washing equipment,廣東洗砂機/Guangdong sand washing machine,洗砂機/sand washing machine
高級搜索:
造成洗砂機進料口堵塞的原因及解決辦法/Causes and solutions to the blockage of the feed port of the sand washing machine

來源: 時間:2018-05-10 16:05:07 次數:

要知道,洗砂機作為現代砂石生產線中必不可少的砂石洗選設備,在產線中起到了減少砂石物料含泥量、提高砂石料品質的作用。/It is necessary to know that the sand washing machine, as an indispensable sand washing equipment in the modern sand and stone production line, plays a role in reducing the mud content of sand and stone

要知道,洗砂機作為現代砂石生產線中必不可少的砂石洗選設備,在產線中起到了減少砂石物料含泥量、提高砂石料品質的作用。一旦洗砂機在生產中因為這種那種的原因產生故障,會對整條生產線的工作效率有著非常大的影響。像是進料口堵塞這種問題,我們要掌握檢查故障原因的辦法已經解決方式,以便在故障發生的時間盡快解決!

洗砂機進料口堵塞的原因及解決辦法:

      一、洗砂機進料口堵塞的常見原因就是出料口堵塞。出料口堵塞,會導致砂石料不能夠順利派出設備,若一直在內部積壓,自然會造成設備內的堵塞,無法進料。若是因為這種情況導致的洗砂機進料口堵塞,應該立即停止洗砂機的運行,將出料口堆積石料清理完,然后再開機運轉。

      二、另外,輸送帶送料過快也會造成洗砂機進料口的堵塞。每一臺洗砂機都有自己的生產標準的,每小時耗電多少,洗多少砂石物料都是有明確規定的,如果輸送帶調節的傳送石料速度過快,處理速度跟不上進料速度,那么在洗砂機的入料口發生堵塞也是不可避免的。如果是這種情況導致的洗砂機進料口堵塞,應該立馬停機,先將入料口堆積的多余的石料清理,其后再降低輸送帶傳送速度,調試為正確的速度。

    三、除此之外,洗砂機進料口的堵塞與砂石的含水量可能也會有些關系。在某些情況下,由于砂石物料的含土量過大,在水分的作用下,非常容易粘連在入料口,若不進行定時的清理,也有可能因其設備的進料口堵塞。而避免這種情況的有效辦法,就是控制好砂石的含水量,并及時的清理入料口的砂石。

It is necessary to know that the sand washing machine, as an indispensable sand washing equipment in the modern sand and stone production line, plays a role in reducing the mud content of sand and stone materials and improving the quality of sand and stone materials in the production line. Once the sand washing machine breaks down in production due to this kind of reason, it will have a great impact on the working efficiency of the whole production line. For example, if the feed port is blocked, we'd better know how to check the cause of the fault and solve it as soon as possible!
The reasons and solutions for the blockage of the feed port of the sand washing machine:
I. the most common reason for the blockage of the feed port of the sand washing machine is the blockage of the discharge port. If the discharge port is blocked, the sand and stone materials will not be able to dispatch the equipment smoothly. If the equipment has been overstocked, it will naturally cause the blockage in the equipment, and the material cannot be fed. If the feed port of the sand washing machine is blocked due to this situation, the operation of the sand washing machine shall be stopped immediately, the accumulated stones at the discharge port shall be cleaned, and then the machine shall be started for operation.
2. In addition, too fast feeding of the conveyor belt will also cause the blockage of the feeding port of the sand washing machine. Each sand washing machine has its own production standard. There are clear regulations on how much power is consumed per hour and how much sand and stone materials are washed. If the speed of stone conveying regulated by the conveyor belt is too fast and the processing speed cannot keep up with the feeding speed, it is inevitable that the feeding port of the sand washing machine will be blocked. If it is caused by this situation that the sand washing machine's feed port is blocked, the machine should be shut down immediately, and the surplus stones accumulated at the feed port should be cleaned first, and then the conveyor belt transmission speed should be reduced to the correct speed.
3. In addition, there may be some relationship between the blockage of the sand washing machine feed port and the water content of the sand. In some cases, due to the excessive soil content of sand and stone materials, it is very easy to adhere to the feed port under the action of water. If not cleaned regularly, it may also be blocked due to the feed port of its equipment. The effective way to avoid this situation is to control the water content of the sand and clean up the sand and stone at the inlet in time.

不卡一卡二卡三网站