歡迎光臨濰坊市正邦重工機械有限公司!Welcome to Weifang Zhengbang Heavy Industry Machinery Co., Ltd!
熱門關鍵詞Hot Keywords:洗沙機/sand washing machine,洗沙設備/sand washing equipment,廣東洗砂機/Guangdong sand washing machine,洗砂機/sand washing machine
高級搜索:
洗沙機械怎么保養才能讓洗沙設備壽命延長/How to maintain sand washing machine to prolong its service life

來源: 時間:2018-04-25 11:55:41 次數:

對洗沙機設備來說日常的保養工作主要就是以為設備的潤滑系統為主,下面為大家總結了以下幾點關于洗沙機潤滑過程中需要注意的細節上的要求,/For the equipment of sand washing machine, the main task of daily maintenance is the lubrication system of the equipment.

對洗沙機設備來說日常的保養工作主要就是以為設備的潤滑系統為主,下面為大家總結了以下幾點關于洗沙機潤滑過程中需要注意的細節上的要求,首先就是當洗沙機設備被應用在一些容易以及火災等事故的環境中的時候,對其使用的潤滑油必須是具有抗燃能力的。其次要根據生產的需要,制砂設備大多數是露天生產的。加上受到惡劣天氣以及晝夜溫差的影響,為了防止潤滑油不能發揮它的功效必須把握好它的使用溫度,同時對它的一些耐腐蝕以及防銹的能力也根據環境有不同的要求。后一點是潤滑油的儲存受到一定限制,必須對它的抗氧化性以及熱穩定性有所要求。只有做好以上三點才能真正的做好保養洗沙機設備的工作。

洗沙機械在使用的時候振動量驟增,軸承座或者地腳螺栓不緊或者轉子不平衡都會出現這種現象,前者可以將螺栓緊固而后者直接將板錘重新安裝并對轉子進行平衡的校正就可以了。洗沙機設備內部出現敲擊聲。引發這種現象要么是破碎腔堵塞要么是襯板緊固件松弛要么就是機械零件出現斷裂,解決的方式也很簡單,分別是清理破碎腔、緊固襯板以及更換零件。遇到其他問題的時候比如需要改造構件,一定要進行咨詢洗沙機廠家,盡量在廠家的指導下進行調整,這樣不會因為技術上的問題為制砂生產生產線帶來損失。

For the equipment of sand washing machine, the main task of daily maintenance is the lubrication system of the equipment. The following are the requirements on the details to be paid attention to in the lubrication process of the sand washing machine. First, when the equipment of sand washing machine is applied in the environment prone to explosion, fire and other accidents, the lubricating oil used for it must be fire-resistant Force. Secondly, according to the needs of production, most of the sand making equipment is produced in the open air. In addition, under the influence of bad weather and temperature difference between day and night, in order to prevent the lubricating oil from playing its role, it is necessary to grasp its use temperature, and at the same time, it has different requirements for its corrosion resistance and rust resistance according to the environment. The last point is that the storage of lubricating oil is limited to some extent, and its oxidation resistance and thermal stability must be required. Only do the above three points can we really do a good job in the maintenance of sand washing machine equipment.
When the sand washing machine is in use, the vibration increases sharply, the bearing seat or anchor bolt is not tight or the rotor is unbalanced. The former can fasten the bolt while the latter can directly reinstall the plate hammer and correct the balance of the rotor. There is knocking sound inside the sand washing machine. This phenomenon is caused either by the blocking of the crushing cavity or by the loosening of the lining plate fastener or by the fracture of the mechanical parts. The solution is also very simple, namely, cleaning the crushing cavity, fastening the lining plate and replacing the parts. When encountering other problems, such as the need to transform the components, it is necessary to consult the sand washing machine manufacturer, and try to adjust under the guidance of the manufacturer, so as not to cause loss to the sand production line due to technical problems.

不卡一卡二卡三网站