歡迎光臨濰坊市正邦重工機械有限公司!Welcome to Weifang Zhengbang Heavy Industry Machinery Co., Ltd!
熱門關鍵詞Hot Keywords:洗沙機/sand washing machine,洗沙設備/sand washing equipment,廣東洗砂機/Guangdong sand washing machine,洗砂機/sand washing machine
高級搜索:
洗砂機技術得到改善有效降低環境負擔/The technology of sand washing machine is improved and the burden of environment is reduced effectively

來源: 時間:2018-01-10 08:48:43 次數:

洗砂機主要由洗料槽、砂漿泵、電機、旋流器、直線振動篩、回料箱等組成。洗砂機工作時砂漿泵、水泥混合物輸送至旋流器,通過旋流器離心分級,濃縮的細砂經出料箱供給直線振動篩,經直線振動篩脫水,細砂由篩前輸出。少量細砂由回料箱返回洗料槽。洗料槽液面過高時經溢流管排出。直線篩輸出細砂含水量(25%)調解細度模數可通過改變泵的轉速,改變砂漿濃度,調節水量,更換出砂嘴來實現,從而完成清洗脫水和分級三種功能。 The sand washing machine is mainly composed of a washing tank, a mortar pump, a motor, a hydrocyclone, a linear vibrating screen, a return box, etc.

洗砂機主要由洗料槽、砂漿泵、電機、旋流器、直線振動篩、回料箱等組成。洗砂機工作時砂漿泵、水泥混合物輸送至旋流器,通過旋流器離心分級,濃縮的細砂經出料箱供給直線振動篩,經直線振動篩脫水,細砂由篩前輸出。少量細砂由回料箱返回洗料槽。洗料槽液面過高時經溢流管排出。直線篩輸出細砂含水量(25%)調解細度模數可通過改變泵的轉速,改變砂漿濃度,調節水量,更換出砂嘴來實現,從而完成清洗脫水和分級三種功能。

洗砂機工作時,電機通過三角帶、減速機、齒輪減速后帶動葉輪緩慢轉動,砂石有給料槽進入洗槽中,在葉輪的帶動下翻滾,并互相研磨,除去覆蓋砂石表面的雜質,同時破壞包覆砂粒的水汽層,以利于脫水;同時加水,形成強大水流,及時將雜質及比重小的異物帶走,并從溢出口洗槽排出,完成清洗作用。干凈的砂石由葉片帶走,后砂石從旋轉的葉輪倒入出料槽,完成砂石的清洗作用。

The sand washing machine is mainly composed of a washing tank, a mortar pump, a motor, a hydrocyclone, a linear vibrating screen, a return box, etc. When the sand washing machine is working, the mortar pump and cement mixture are delivered to the hydrocyclone for centrifugation and classification through the hydrocyclone. The concentrated fine sand is supplied to the linear vibrating screen through the discharge box, dehydrated by the linear vibrating screen, and the fine sand is output from the front of the screen. A small amount of fine sand is returned to the washing tank from the return box. When the liquid level of the washing tank is too high, it is discharged through the overflow pipe. The output water content of fine sand (25%) of linear screen can adjust the fineness modulus by changing the rotation speed of pump, changing the mortar concentration, adjusting the water content and replacing the sand nozzle, so as to complete the three functions of cleaning, dewatering and grading.
During the operation of the sand washing machine, the motor drives the impeller to rotate slowly after decelerating through the triangle belt, reducer and gear. The sand and gravel enter the washing tank with the feed tank, roll under the drive of the impeller, and grind each other to remove the impurities covering the surface of the sand and gravel, and destroy the water vapor layer covering the sand and gravel, so as to facilitate dehydration; at the same time, add water to form a strong water flow to timely remove the impurities and foreign matters with small specific gravity Take it away and discharge it from the overflow outlet washing tank to complete the cleaning function. The clean sand is taken away by the blade, and finally the sand is poured into the discharge chute from the rotating impeller to complete the cleaning function of the sand.

不卡一卡二卡三网站